Camtrapper
http://camtrapper.com/

Need some timing help
http://camtrapper.com/viewtopic.php?f=38&t=2022
Page 1 of 1

Author:  tbass [ Tue Sep 28, 2010 6:03 pm ]
Post subject:  Need some timing help

I have a project going and need a bit of help. I am trying to get the timings for some common cameras. I need the delay from power on until shutter for them. Refresh times if you have them. Here are some of the cameras I'm looking for.

W1/5/7/30/40/50/55/70/200/220/230
P32/41
S600/40
L11/14

Any other common cams are welcome too.

Author:  johnnydeerhunter [ Tue Sep 28, 2010 7:59 pm ]
Post subject:  Re: Need some timing help

you can probably get most of them from the SSS site. I think the w1/5/7 and p41 are the same 1.2 second shutter.

on my w200 I use a 1.5 or 2 hr refresh and a 1.85 second shutter

Author:  bowgod02 [ Wed Sep 29, 2010 4:11 am ]
Post subject:  Re: Need some timing help

P41, w1, w5, w7 = 1.2
p32, p52 = 1.5
s600, s40 = 1.8

Author:  tbass [ Wed Sep 29, 2010 10:23 am ]
Post subject:  Re: Need some timing help

Think the W200 can cut down to 1.8 so it can be lumped in with the s600/40?

Author:  johnnydeerhunter [ Wed Sep 29, 2010 10:43 am ]
Post subject:  Re: Need some timing help

probably but not sure. might depend on how long you hold the shutter signal.

Author:  tbass [ Wed Sep 29, 2010 10:45 am ]
Post subject:  Re: Need some timing help

The SSS holds it for I think 3 or 4 seconds. Gary told me once. I'm trying to get a collection of timings to lump cameras into a group in one location.

Author:  buckshot164 [ Wed Sep 29, 2010 3:53 pm ]
Post subject:  Re: Need some timing help

300 is the count. This can cause issues with the sss board with certain cameras. Like the Fuji J10 where the count is 500 and the a402 which is 1000. This has to be specually programmed on the sss board.

Author:  tbass [ Wed Sep 29, 2010 4:28 pm ]
Post subject:  Re: Need some timing help

you confused me now Charles. What count are you talking about? I'm not real familiar with the SSS board.

Page 1 of 1 All times are
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/