GoPro SS#2-want to record for 2 minutes

[greengrass]

I have a Gorpo that is controlled by an SS#2 board. Currently the Gopro only records for ~13 seconds each time motion is sensed, but I would like the GoPro to record for two minutes each time. I have the Gorpo program, but I am not sure how/which part of the program I need to modify so that the board allows the camera to record for two minutes.

Hopefully this is the correct part of the program for what I am asking. The current program for the camera on is as follows:

Camera ON
Pause 5000
Low CameraPowerPin
Sleep 5
High CameraPowerPin ' Turn Camera OFF
Pause 4000
Low CameraPowerPin
Sleep DelayBetweenPictures

If I wanted my GoPro to stay on for two minutes...would I just change the "pause 4000"(under the Turn camera off) to a larger number to increase the amount of time that the board would keep the camera on? Any input would be greatly appreciated.

[johnnydeerhunter]

Can you post the whole program? Just use the code tags, above where you are typing your post you will see the word "code" in a box, click on that and paste your code in the middle

Code: Select all

[code]place code here

[/code]

[ghoot]

Change the number for "Sleep". 1 sleep equals 2.3 seconds, so "Sleep 5" = 5 * 2.3 = 11.5 seconds. For 2 minutes: 120 Seconds/2.3 = 52.17, so a "Sleep 52" will do about 2 minutes.

[greengrass]

Thanks Gary! I didn't write the Gopro code and haven't gotten permission to publicly post it. In other words, someone put a lot of work into it and it's not mine.

[ghoot]

It looks like my code, so post away if you ever need to.