In desperate need of a working W1 AIO code.

[bowgod02]

I started to mess with different timings on the W1 yesturday morning trying to get it to miss a shutter and I finally got it to do so. I went outside after that to work on my shed so I'll have to get back on it to see why it missed the shutter on my last test. So now I know your not crazy...

[Live2Hunt]

I have done some more testing and it appears that the camera works perfectly in low light or total dark. It has not missed a shutter yet in total darkness. But when there is light, the first picture in trail mode will not shutter. I don't know why it's doing that? But that is what it's doing.

[bowgod02]

That sure does sound strange doesnt it, but I'll do some testing in lighting situations too.

[Live2Hunt]

It is not the W1. I hacked a p41 and hooked it to the board with the same code and it did not work right either. However I hooked and s40 to the same board and used an s40 code and it works
Perfectly. I have another AIO board that is running a W290. I used that board with my W1 and it would not work right either. I can't get either board to run a w1 or a p41 but they will
Run a w290????????

[bowgod02]

I'm workng on a new program for you so stay tuned.

[bowgod02]

New code sent to you to try. Let me know how it works.

[bowgod02]

I think I may have found the glitch..... Check this part of the code in the beginning and make sure PinC.7 is set to input and not output

Code: Select all

Input PT_IN
Output CDS_Out
Output Flash_Out
Output Flash_Charge
Output PT_Out
Output Spare_Out
Output Battery_Monitor
Input LDR_IN
Output Shutter_Out
Output Power_Out
Output LED_Out
Input PIR_In
Input C.7
Output C.0
Output B.7
Output A.0

[Live2Hunt]

What about C.0?? Input or output. I was looking at other codes and it showed it as input but the revised code you sent me it is output?

[bowgod02]

The code I sent you only reads pinC.7 for feeder/trail mode so you would want C.0 as an output. I found this thismorning when I was working on changing a code on another cam. I was getting very irratic behavior. Missing pics 90% of the time on the first shot or in feeder mode. Once I changed it to an input all was fine with this cam I'm working on.

[Live2Hunt]

Ok. Thanks. I will try this code later.