Camtrapper

been too long and my peabrain is confused. slave flash is a viv 2000 (31657 variant). which wires from the BF slavemaster will connect to the red/black wires from the back of the slave flash board that originally were hooked to 6volt power when the flash was a unit in the plastic housing?

i am assuming (and thats where i get in trouble lots of the time) the black/red wires from the slavemaster board connect to 6volt source to power the slavemaster board.
i also am assuming the orange/green wires from the slavemaster board connect to another 6volt source to power the slave flash unit.
the blue/yellow wires from the slavemaster board are triggers and connect to red/green wires on the slave flash board to trigger flash. (got that part)

with wiring connected like this i still have the red/black wires from the slave flash board that were originally connected to batteries in the flash gun with no place to connect.. its got to be something simple i realize.. doesn't the slavemaster board need its own power source?(6volt)
if you can help i would thank you.. i am hung up on this..

thanks

teebo

I answered your questions over on Hag's....

saw it; and thanks to you.. good luck this season..
teebo